UHMWPE has excellent wear resistance, good low temperature impact resistance, self-lubricating, non-toxic, water resistance, chemical resistance, heat resistance than the general PE unloading ditch special polyethylene liner, the drawback is the heat resistance (heat distortion temperature) is low, poor formability, surface hardness of the outer bin special polyethylene liner, stiffness, creep resistance than most engineering plastics, coefficient of expansion is too large. UHMWPE poor mobility, high viscosity of the molten state, is in the form of a highly viscous rubber-like elastomer, can only be used early pressing and sintering molding, it is also available for extrusion, injection molding and blow molding processing methods. Application of a polyethylene sheet, initial use, be material storage bin to the rear two-thirds of the entire warehouse capacity, re-discharge. 2, the direct impact of the liner material is strictly prohibited. 3, the operation of dedicated warehouse coke polyethylene liner, to always keep the material inside the heap Jincang point blanking warehouse materials, and keep the material in the warehouse storage capacity of more than half the entire warehouse capacity. 4, ambient temperature, usually not more than 80 ℃. 5 Do not use external damage to its structure and random loose fasteners. 6, particles of various materials with different hardness Do not change the flow of materials and polyethylene liner, For change, must not be greater than the original design capacity of 12%, free to change the material or traffic will affect the life of the liner. [Jiujiang polyethylene liner] | silo special polyethylene liner | Yu-plastic professional quality provided by Yu-plastic products. Welcome to consult Dezhou Yu-Plastic Products Co., Ltd. (www.dezhouyuang.com), be sure to specify when contact is through "business alliance members," see, thank you! Contact: Manager