Coal bunker liner Installation Notes: 1, using bolts per square meter should not be less than 10; 2, flat countersunk head bolts requirements must be lower than the board; 3, the gap between the plates should not be greater than 0.5cm (Installation To According to the sheet using the ambient temperature to give appropriate adjustments) 4, the material in the warehouse standstill time should not exceed 36 hours (less viscous material wear and do not stay in a coal bunker liner factory warehouse, to prevent caking) coal bin liner, material moisture content of less than 4% of the rest time may be extended. 5, at lower temperatures, please pay attention to the material in the warehouse still time coal bunker liner dezhouyuan, avoid frozen blocks. Second, before the deal with bin liner inspect installation of a raised or recessed from the Department should try to deal with the formation, has been used for the cement silo body should conduct a thorough pre-clearance processing, in order to prevent the installation of the liner is not tight or off the board to happen. Third, before the liner installation should work out according to the actual situation of the silo installation process, complied with during installation. Fourth, when the flame coal bunker liner liner installation, should minimize seams perpendicular to the direction of flow of material in order to reduce the flow resistance of the material to achieve the best logistics effect. Fifth, install the liner before cutting deal with the bottom cut out to play 45 ° groove seams between the board and the board should be "under the poor" approach installation lap, and according to the local climate, hopper shape, size different, different size joints reserved. Storage bunker prices _ Yu-plastic liner timely delivery (certified) _ coal bunker liner provided by Dezhou Yu-Plastic Products Limited. Dezhou Yu-Plastic Products Co., Ltd. (www.dezhouyuang.com) (www.dezhouyuang.com) is Dezhou, a leader in engineering plastics, over the years, the company is implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, the maximum to meet customer needs. In Yu-plastic products led the staff warmly welcome all inquiries negotiations to create Yu-plastic products a better future.